Residential water meter MNK-FA

Multi-jet wet dial meters for cold water in a downpipe design
For vertical installation positions with a downward flow direction, the proven MNK wet dial measuring insert is available with downpipe housing.
The MNK-FA water meter is designed for downpipe installation and makes calibration replacement uncomplicated. In comparison with a vertically installed standard water meter, the register keeps on functioning, even in a horizontal position. Thanks to the resulting decrease in bearing load, a significant improvement in the long-term measuring reliability can be achieved. Version MNK-N-FA is retrofittable with pulser (reed) for remote readout.

  • Measuring Principle: Multi-Jet Meters
  • Length without connectors: 105 mm
  • Housing Material: Brass
  • Register: Wet Dial
  • Nominal Flow Q3 (≈ Qn):
    • Q3=4(≈ Qn 2,5)
  • Nominal Diameter DN (mm): DN 20
  • Temperature:
    • Cold water up to 50° C
  • Specified Units on Display: Cubik Meters (m³)
  • AMR Technologies: Reed Pulser
  • Metrological Class horizontal (max.): R 80
  • Operating pressure (max.): MAP 16

-For the consumption measuring of cold potable water up to 50° C
-Water meter for standpipe installation

Retrofittable with pulser (Standard pulse value 10 l/Imp., optional 100 l/Imp.)
- Radio via PDC-radio module:
- Wireless M-bus (according to OMS)
- Radio via LPWAN (LoRaWAN™, SIGFOX