Submersible sampling pump 2” GRUNDFOS MP1

View

Grundfos MP1 is a 2” submersible pump specifically designed to be used as an Environmental sampling pump.

The MP 1 has been specially developed for sampling.
MP 1 pump is made of inert materials, which do not affect the pumped liquid and thus the analysis results.
The pump performance is adjusted by means of the converter which controls the pump speed via the frequency.
The pump performance is adjusted by means of the converter which controls the pump speed via the frequency.
Maximum performance is at 400 Hz.

The MP 1 is designed for the pumping of contaminated/polluted groundwater for:
• purging
• sampling
• water quality monitoring.

The MP 1 has been specially developed for sampling, i.e. pumping of small quantities of water to be sent to the laboratory for analysis in order to establish:
• content of contaminants,
• concentration of contaminants,
• extension of contamination plume.

The MP 1 pump is made of inert materials, which do not affect the pumped liquid and thus the analysis results.
The pump performance is adjusted by means of the converter which controls the pump speed via the frequency. In this way a steady, airfree water flow can be achieved.
The MP 1 offers efficient purging of the well before sampling as a high pump performance is achieved when the frequency is raised. Maximum performance is at 400 Hz.

Contact Us

  • Address: Via Lazio, 14 San Giuliano M.se (MI) 20098

  • Italy: +393477650128 - +393484741065

  • Other Countries: +393484741065

  • Email: info@acquageo.com

Follow Us